Maintaining a Project
In addition to knowing how to effectively contribute to a project, you’ll likely need to know how to maintain one. This can consist of accepting and applying patches generated via
format-patch and e-mailed to you, or integrating changes in remote branches for repositories you’ve added as remotes to your project. Whether you maintain a canonical repository or want to help by verifying or approving patches, you need to know how to accept work in a way that is clearest for other contributors and sustainable by you over the long run.
Working in Topic Branches
When you’re thinking of integrating new work, it’s generally a good idea to try it out in a topic branch — a temporary branch specifically made to try out that new work. This way, it’s easy to tweak a patch individually and leave it if it’s not working until you have time to come back to it. If you create a simple branch name based on the theme of the work you’re going to try, such as
ruby_client or something similarly descriptive, you can easily remember it if you have to abandon it for a while and come back later. The maintainer of the Git project tends to namespace these branches as well — such as
sc is short for the person who contributed the work.
As you’ll remember, you can create the branch based off your master branch like this:
$ git branch sc/ruby_client master
Or, if you want to also switch to it immediately, you can use the
checkout -b command:
$ git checkout -b sc/ruby_client master
Now you’re ready to add your contributed work into this topic branch and determine if you want to merge it into your longer-term branches.
Applying Patches from E-mail
If you receive a patch over e-mail that you need to integrate into your project, you need to apply the patch in your topic branch to evaluate it. There are two ways to apply an e-mailed patch: with
git apply or with
Applying a Patch with apply
If you received the patch from someone who generated it with the
git diff or a Unix
diff command, you can apply it with the
git apply command. Assuming you saved the patch at
/tmp/patch-ruby-client.patch, you can apply the patch like this:
$ git apply /tmp/patch-ruby-client.patch
This modifies the files in your working directory. It’s almost identical to running a
patch -p1 command to apply the patch, although it’s more paranoid and accepts fewer fuzzy matches than patch. It also handles file adds, deletes, and renames if they’re described in the
git diff format, which
patch won’t do. Finally,
git apply is an "apply all or abort all" model where either everything is applied or nothing is, whereas
patch can partially apply patchfiles, leaving your working directory in a weird state.
git apply is overall much more paranoid than
patch. It won’t create a commit for you — after running it, you must stage and commit the changes introduced manually.
You can also use git apply to see if a patch applies cleanly before you try actually applying it — you can run
git apply --check with the patch:
$ git apply --check 0001-seeing-if-this-helps-the-gem.patch error: patch failed: ticgit.gemspec:1 error: ticgit.gemspec: patch does not apply
If there is no output, then the patch should apply cleanly. This command also exits with a non-zero status if the check fails, so you can use it in scripts if you want.
Applying a Patch with am
If the contributor is a Git user and was good enough to use the
format-patch command to generate their patch, then your job is easier because the patch contains author information and a commit message for you. If you can, encourage your contributors to use
format-patch instead of
diff to generate patches for you. You should only have to use
git apply for legacy patches and things like that.
To apply a patch generated by
format-patch, you use
git am. Technically,
git am is built to read an mbox file, which is a simple, plain-text format for storing one or more e-mail messages in one text file. It looks something like this:
From 330090432754092d704da8e76ca5c05c198e71a8 Mon Sep 17 00:00:00 2001 From: Jessica Smith <firstname.lastname@example.org> Date: Sun, 6 Apr 2008 10:17:23 -0700 Subject: [PATCH 1/2] add limit to log function Limit log functionality to the first 20
This is the beginning of the output of the format-patch command that you saw in the previous section. This is also a valid mbox e-mail format. If someone has e-mailed you the patch properly using git send-email, and you download that into an mbox format, then you can point git am to that mbox file, and it will start applying all the patches it sees. If you run a mail client that can save several e-mails out in mbox format, you can save entire patch series into a file and then use git am to apply them one at a time.
However, if someone uploaded a patch file generated via
format-patch to a ticketing system or something similar, you can save the file locally and then pass that file saved on your disk to
git am to apply it:
$ git am 0001-limit-log-function.patch Applying: add limit to log function
You can see that it applied cleanly and automatically created the new commit for you. The author information is taken from the e-mail’s
Date headers, and the message of the commit is taken from the
Subject and body (before the patch) of the e-mail. For example, if this patch was applied from the mbox example I just showed, the commit generated would look something like this:
$ git log --pretty=fuller -1 commit 6c5e70b984a60b3cecd395edd5b48a7575bf58e0 Author: Jessica Smith <email@example.com> AuthorDate: Sun Apr 6 10:17:23 2008 -0700 Commit: Scott Chacon <firstname.lastname@example.org> CommitDate: Thu Apr 9 09:19:06 2009 -0700 add limit to log function Limit log functionality to the first 20
Commit information indicates the person who applied the patch and the time it was applied. The
Author information is the individual who originally created the patch and when it was originally created.
But it’s possible that the patch won’t apply cleanly. Perhaps your main branch has diverged too far from the branch the patch was built from, or the patch depends on another patch you haven’t applied yet. In that case, the
git am process will fail and ask you what you want to do:
$ git am 0001-seeing-if-this-helps-the-gem.patch Applying: seeing if this helps the gem error: patch failed: ticgit.gemspec:1 error: ticgit.gemspec: patch does not apply Patch failed at 0001. When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort".
This command puts conflict markers in any files it has issues with, much like a conflicted merge or rebase operation. You solve this issue much the same way — edit the file to resolve the conflict, stage the new file, and then run
git am --resolved to continue to the next patch:
$ (fix the file) $ git add ticgit.gemspec $ git am --resolved Applying: seeing if this helps the gem
If you want Git to try a bit more intelligently to resolve the conflict, you can pass a
-3 option to it, which makes Git attempt a three-way merge. This option isn’t on by default because it doesn’t work if the commit the patch says it was based on isn’t in your repository. If you do have that commit — if the patch was based on a public commit — then the
-3 option is generally much smarter about applying a conflicting patch:
$ git am -3 0001-seeing-if-this-helps-the-gem.patch Applying: seeing if this helps the gem error: patch failed: ticgit.gemspec:1 error: ticgit.gemspec: patch does not apply Using index info to reconstruct a base tree... Falling back to patching base and 3-way merge... No changes -- Patch already applied.
In this case, I was trying to apply a patch I had already applied. Without the
-3 option, it looks like a conflict.
If you’re applying a number of patches from an mbox, you can also run the
am command in interactive mode, which stops at each patch it finds and asks if you want to apply it:
$ git am -3 -i mbox Commit Body is: -------------------------- seeing if this helps the gem -------------------------- Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all
This is nice if you have a number of patches saved, because you can view the patch first if you don’t remember what it is, or not apply the patch if you’ve already done so.
When all the patches for your topic are applied and committed into your branch, you can choose whether and how to integrate them into a longer-running branch.
Checking Out Remote Branches
If your contribution came from a Git user who set up their own repository, pushed a number of changes into it, and then sent you the URL to the repository and the name of the remote branch the changes are in, you can add them as a remote and do merges locally.
For instance, if Jessica sends you an e-mail saying that she has a great new feature in the
ruby-client branch of her repository, you can test it by adding the remote and checking out that branch locally:
$ git remote add jessica git://github.com/jessica/myproject.git $ git fetch jessica $ git checkout -b rubyclient jessica/ruby-client
If she e-mails you again later with another branch containing another great feature, you can fetch and check out because you already have the remote setup.
This is most useful if you’re working with a person consistently. If someone only has a single patch to contribute once in a while, then accepting it over e-mail may be less time consuming than requiring everyone to run their own server and having to continually add and remove remotes to get a few patches. You’re also unlikely to want to have hundreds of remotes, each for someone who contributes only a patch or two. However, scripts and hosted services may make this easier — it depends largely on how you develop and how your contributors develop.
The other advantage of this approach is that you get the history of the commits as well. Although you may have legitimate merge issues, you know where in your history their work is based; a proper three-way merge is the default rather than having to supply a
-3 and hope the patch was generated off a public commit to which you have access.
If you aren’t working with a person consistently but still want to pull from them in this way, you can provide the URL of the remote repository to the
git pull command. This does a one-time pull and doesn’t save the URL as a remote reference:
$ git pull git://github.com/onetimeguy/project.git From git://github.com/onetimeguy/project * branch HEAD -> FETCH_HEAD Merge made by recursive.
Determining What Is Introduced
Now you have a topic branch that contains contributed work. At this point, you can determine what you’d like to do with it. This section revisits a couple of commands so you can see how you can use them to review exactly what you’ll be introducing if you merge this into your main branch.
It’s often helpful to get a review of all the commits that are in this branch but that aren’t in your master branch. You can exclude commits in the master branch by adding the
--not option before the branch name. For example, if your contributor sends you two patches and you create a branch called
contrib and applied those patches there, you can run this:
$ git log contrib --not master commit 5b6235bd297351589efc4d73316f0a68d484f118 Author: Scott Chacon <email@example.com> Date: Fri Oct 24 09:53:59 2008 -0700 seeing if this helps the gem commit 7482e0d16d04bea79d0dba8988cc78df655f16a0 Author: Scott Chacon <firstname.lastname@example.org> Date: Mon Oct 22 19:38:36 2008 -0700 updated the gemspec to hopefully work better
To see what changes each commit introduces, remember that you can pass the
-p option to
git log and it will append the diff introduced to each commit.
To see a full diff of what would happen if you were to merge this topic branch with another branch, you may have to use a weird trick to get the correct results. You may think to run this:
$ git diff master
This command gives you a diff, but it may be misleading. If your
master branch has moved forward since you created the topic branch from it, then you’ll get seemingly strange results. This happens because Git directly compares the snapshots of the last commit of the topic branch you’re on and the snapshot of the last commit on the
master branch. For example, if you’ve added a line in a file on the
master branch, a direct comparison of the snapshots will look like the topic branch is going to remove that line.
master is a direct ancestor of your topic branch, this isn’t a problem; but if the two histories have diverged, the diff will look like you’re adding all the new stuff in your topic branch and removing everything unique to the
What you really want to see are the changes added to the topic branch — the work you’ll introduce if you merge this branch with master. You do that by having Git compare the last commit on your topic branch with the first common ancestor it has with the master branch.
Technically, you can do that by explicitly figuring out the common ancestor and then running your diff on it:
$ git merge-base contrib master 36c7dba2c95e6bbb78dfa822519ecfec6e1ca649 $ git diff 36c7db
However, that isn’t convenient, so Git provides another shorthand for doing the same thing: the triple-dot syntax. In the context of the
diff command, you can put three periods after another branch to do a
diff between the last commit of the branch you’re on and its common ancestor with another branch:
$ git diff master...contrib
This command shows you only the work your current topic branch has introduced since its common ancestor with master. That is a very useful syntax to remember.
Integrating Contributed Work
When all the work in your topic branch is ready to be integrated into a more mainline branch, the question is how to do it. Furthermore, what overall workflow do you want to use to maintain your project? You have a number of choices, so I’ll cover a few of them.
One simple workflow merges your work into your
master branch. In this scenario, you have a
master branch that contains basically stable code. When you have work in a topic branch that you’ve done or that someone has contributed and you’ve verified, you merge it into your master branch, delete the topic branch, and then continue the process. If we have a repository with work in two branches named
php_client that looks like Figure 5-19 and merge
ruby_client first and then
php_client next, then your history will end up looking like Figure 5-20.
Figure 5-19. History with several topic branches.
Figure 5-20. After a topic branch merge.
That is probably the simplest workflow, but it’s problematic if you’re dealing with larger repositories or projects.
If you have more developers or a larger project, you’ll probably want to use at least a two-phase merge cycle. In this scenario, you have two long-running branches,
develop, in which you determine that
master is updated only when a very stable release is cut and all new code is integrated into the
develop branch. You regularly push both of these branches to the public repository. Each time you have a new topic branch to merge in (Figure 5-21), you merge it into
develop (Figure 5-22); then, when you tag a release, you fast-forward
master to wherever the now-stable
develop branch is (Figure 5-23).
Figure 5-21. Before a topic branch merge.
Figure 5-22. After a topic branch merge.
Figure 5-23. After a topic branch release.
This way, when people clone your project’s repository, they can either check out master to build the latest stable version and keep up to date on that easily, or they can check out develop, which is the more cutting-edge stuff. You can also continue this concept, having an integrate branch where all the work is merged together. Then, when the codebase on that branch is stable and passes tests, you merge it into a develop branch; and when that has proven itself stable for a while, you fast-forward your master branch.
The Git project has four long-running branches:
pu (proposed updates) for new work, and
maint for maintenance backports. When new work is introduced by contributors, it’s collected into topic branches in the maintainer’s repository in a manner similar to what I’ve described (see Figure 5-24). At this point, the topics are evaluated to determine whether they’re safe and ready for consumption or whether they need more work. If they’re safe, they’re merged into
next, and that branch is pushed up so everyone can try the topics integrated together.
Figure 5-24. Managing a complex series of parallel contributed topic branches.
If the topics still need work, they’re merged into
pu instead. When it’s determined that they’re totally stable, the topics are re-merged into
master and are then rebuilt from the topics that were in
next but didn’t yet graduate to
master. This means
master almost always moves forward,
next is rebased occasionally, and
pu is rebased even more often (see Figure 5-25).
Figure 5-25. Merging contributed topic branches into long-term integration branches.
When a topic branch has finally been merged into
master, it’s removed from the repository. The Git project also has a
maint branch that is forked off from the last release to provide backported patches in case a maintenance release is required. Thus, when you clone the Git repository, you have four branches that you can check out to evaluate the project in different stages of development, depending on how cutting edge you want to be or how you want to contribute; and the maintainer has a structured workflow to help them vet new contributions.
Rebasing and Cherry Picking Workflows
Other maintainers prefer to rebase or cherry-pick contributed work on top of their master branch, rather than merging it in, to keep a mostly linear history. When you have work in a topic branch and have determined that you want to integrate it, you move to that branch and run the rebase command to rebuild the changes on top of your current master (or
develop, and so on) branch. If that works well, you can fast-forward your
master branch, and you’ll end up with a linear project history.
The other way to move introduced work from one branch to another is to cherry-pick it. A cherry-pick in Git is like a rebase for a single commit. It takes the patch that was introduced in a commit and tries to reapply it on the branch you’re currently on. This is useful if you have a number of commits on a topic branch and you want to integrate only one of them, or if you only have one commit on a topic branch and you’d prefer to cherry-pick it rather than run rebase. For example, suppose you have a project that looks like Figure 5-26.
Figure 5-26. Example history before a cherry pick.
If you want to pull commit
e43a6 into your master branch, you can run
$ git cherry-pick e43a6fd3e94888d76779ad79fb568ed180e5fcdf Finished one cherry-pick. [master]: created a0a41a9: "More friendly message when locking the index fails." 3 files changed, 17 insertions(+), 3 deletions(-)
This pulls the same change introduced in
e43a6, but you get a new commit SHA-1 value, because the date applied is different. Now your history looks like Figure 5-27.
Figure 5-27. History after cherry-picking a commit on a topic branch.
Now you can remove your topic branch and drop the commits you didn’t want to pull in.
Tagging Your Releases
When you’ve decided to cut a release, you’ll probably want to drop a tag so you can re-create that release at any point going forward. You can create a new tag as I discussed in Chapter 2. If you decide to sign the tag as the maintainer, the tagging may look something like this:
$ git tag -s v1.5 -m 'my signed 1.5 tag' You need a passphrase to unlock the secret key for user: "Scott Chacon <email@example.com>" 1024-bit DSA key, ID F721C45A, created 2009-02-09
If you do sign your tags, you may have the problem of distributing the public PGP key used to sign your tags. The maintainer of the Git project has solved this issue by including their public key as a blob in the repository and then adding a tag that points directly to that content. To do this, you can figure out which key you want by running
$ gpg --list-keys /Users/schacon/.gnupg/pubring.gpg --------------------------------- pub 1024D/F721C45A 2009-02-09 [expires: 2010-02-09] uid Scott Chacon <firstname.lastname@example.org> sub 2048g/45D02282 2009-02-09 [expires: 2010-02-09]
Then, you can directly import the key into the Git database by exporting it and piping that through
git hash-object, which writes a new blob with those contents into Git and gives you back the SHA-1 of the blob:
$ gpg -a --export F721C45A | git hash-object -w --stdin 659ef797d181633c87ec71ac3f9ba29fe5775b92
Now that you have the contents of your key in Git, you can create a tag that points directly to it by specifying the new SHA-1 value that the
hash-object command gave you:
$ git tag -a maintainer-pgp-pub 659ef797d181633c87ec71ac3f9ba29fe5775b92
If you run
git push --tags, the
maintainer-pgp-pub tag will be shared with everyone. If anyone wants to verify a tag, they can directly import your PGP key by pulling the blob directly out of the database and importing it into GPG:
$ git show maintainer-pgp-pub | gpg --import
They can use that key to verify all your signed tags. Also, if you include instructions in the tag message, running
git show <tag> will let you give the end user more specific instructions about tag verification.
Generating a Build Number
Because Git doesn’t have monotonically increasing numbers like 'v123' or the equivalent to go with each commit, if you want to have a human-readable name to go with a commit, you can run
git describe on that commit. Git gives you the name of the nearest tag with the number of commits on top of that tag and a partial SHA-1 value of the commit you’re describing:
$ git describe master v1.6.2-rc1-20-g8c5b85c
This way, you can export a snapshot or build and name it something understandable to people. In fact, if you build Git from source code cloned from the Git repository,
git --version gives you something that looks like this. If you’re describing a commit that you have directly tagged, it gives you the tag name.
git describe command favors annotated tags (tags created with the
-s flag), so release tags should be created this way if you’re using
git describe, to ensure the commit is named properly when described. You can also use this string as the target of a checkout or show command, although it relies on the abbreviated SHA-1 value at the end, so it may not be valid forever. For instance, the Linux kernel recently jumped from 8 to 10 characters to ensure SHA-1 object uniqueness, so older
git describe output names were invalidated.
Preparing a Release
Now you want to release a build. One of the things you’ll want to do is create an archive of the latest snapshot of your code for those poor souls who don’t use Git. The command to do this is
$ git archive master --prefix='project/' | gzip > `git describe master`.tar.gz $ ls *.tar.gz v1.6.2-rc1-20-g8c5b85c.tar.gz
If someone opens that tarball, they get the latest snapshot of your project under a project directory. You can also create a zip archive in much the same way, but by passing the
--format=zip option to
$ git archive master --prefix='project/' --format=zip > `git describe master`.zip
You now have a nice tarball and a zip archive of your project release that you can upload to your website or e-mail to people.
It’s time to e-mail your mailing list of people who want to know what’s happening in your project. A nice way of quickly getting a sort of changelog of what has been added to your project since your last release or e-mail is to use the
git shortlog command. It summarizes all the commits in the range you give it; for example, the following gives you a summary of all the commits since your last release, if your last release was named v1.0.1:
$ git shortlog --no-merges master --not v1.0.1 Chris Wanstrath (8): Add support for annotated tags to Grit::Tag Add packed-refs annotated tag support. Add Grit::Commit#to_patch Update version and History.txt Remove stray `puts` Make ls_tree ignore nils Tom Preston-Werner (4): fix dates in history dynamic version method Version bump to 1.0.2 Regenerated gemspec for version 1.0.2
You get a clean summary of all the commits since v1.0.1, grouped by author, that you can e-mail to your list.